top of page
Tradigo Giovanni logo
Description

INSTRUCTIONS FOR USE

The surfaces to be bonded must be clean, dry and free from grease and dust. The adhesive to be used and the surfaces involved must be acclimatised before starting the bonding procedure. Spread an even layer of Überkoll 100 on both surfaces to be bonded. Wait about 10/20 minutes for the solvents to evaporate and join the parts, applying strong pressure over the whole surface for a few seconds. Avoid trapping air bubbles between the parts and take care to position them correctly, because the bond is very strong and difficult to reposition. Any stains or residues of fresh adhesive can be removed with a cloth soaked in acetone. Dried adhesive residues can be removed with acetone or with Überkoll Diluente. Store at room temperature in a dry, indoor place, in the original packaging.

Medium-viscosity polychloroprene contact adhesive. Solvent-based adhesive. Suitable for bonding hide, leather, rubber, wood, cork, fabrics, porous plastics, foam rubber, cardboard, metal and expanded materials. Not suitable for polystyrene and PP-PE plastics. For bonding small sections of panels, veneers, linoleum and sound-insulating foams on various surfaces. Used in DIY, hobby work and household repairs; used to repair shoes, bags and belts. Strong initial grip. Maximum strength is reached after 48 hours. Bonded materials remain elastic. Free from toluene and chlorinated solvents. Moisture-resistant.

Überkoll 100 Adhesive – 75 ml
SKU: 110010901

Überkoll 100 Adhesive – 75 ml

Strong adhesive for hide, leather, rubber, wood, cork, fabrics, porous plastics, foam rubber, cardboard, metal and expanded materials. Not suitable for polystyrene and PP-PE plastics. For bonding small sections of panels, veneers, linoleum and sound-insulating foams on various surfaces. Used in DIY, hobby work and household repairs; used to repair shoes, bags and belts.


DESCRIPTION

Medium-viscosity polychloroprene contact adhesive. Solvent-based adhesive. Suitable for bonding hide, leather, rubber, wood, cork, fabrics, porous plastics, foam rubber, cardboard, metal and expanded materials. Not suitable for polystyrene and PP-PE plastics. For bonding small sections of panels, veneers, linoleum and sound-insulating foams on various surfaces. Used in DIY, hobby work and household repairs; used to repair shoes, bags and belts. Strong initial grip. Maximum strength is reached after 48 hours. Bonded materials remain elastic. Free from toluene and chlorinated solvents. Moisture-resistant.

bottom of page