top of page
Tradigo Giovanni logo
Description

INSTRUCTIONS FOR USE

The surfaces to be bonded must be clean, dry and free from grease and dust. The adhesive to be used and the surfaces involved must be acclimatised before starting the bonding procedure. Shake before use. Open carefully. Using spray equipment, apply a layer of Überkoll / Spruzzo H.R. as even as possible to both surfaces to be bonded. Wait about 5/15 minutes for the solvents to evaporate and join the parts, applying strong pressure over the whole surface. Avoid trapping air bubbles between the parts and take care to position them correctly, because the bond is very strong and difficult to reposition. For thinning, if needed, use Überkoll Diluente. Any stains or residues of fresh adhesive can be removed with a cloth soaked in acetone. Dried adhesive residues can be removed with acetone or with our Überkoll Diluente. Store at room temperature in a dry, indoor place, in the original packaging.

Low-viscosity polychloroprene contact adhesive for spray application. Solvent-based adhesive. Adhesive for professional use. Suitable for foam rubber, expanded polyurethane, phenolic foams, hide, leather, natural rubber, synthetic rubbers, fabrics, metal, wood, plastic laminates, soft PVC, porous plastics and cork. Used in thermal and acoustic insulation, panelling and coverings, professional furnishing and upholstery. Valued in car upholstery for its greater heat resistance. Strong initial grip. Excellent sprayability. Excellent strength after 48 hours. Bonded materials remain elastic. Free from toluene and chlorinated solvents. Moisture-resistant.

Überkoll Spray Adhesive H.R.

Überkoll Spray Adhesive H.R.

Low-viscosity spray adhesive for foam rubber, expanded polyurethane, phenolic foams, hide, leather, natural rubber, synthetic rubbers, fabrics, metal, wood, plastic laminates, soft PVC, porous plastics and cork. Used in thermal and acoustic insulation, panelling and coverings, professional furnishing and upholstery. Valued in car upholstery for its greater heat resistance.


DESCRIPTION

Low-viscosity polychloroprene contact adhesive for spray application. Solvent-based adhesive. Adhesive for professional use. Suitable for foam rubber, expanded polyurethane, phenolic foams, hide, leather, natural rubber, synthetic rubbers, fabrics, metal, wood, plastic laminates, soft PVC, porous plastics and cork. Used in thermal and acoustic insulation, panelling and coverings, professional furnishing and upholstery. Valued in car upholstery for its greater heat resistance. Strong initial grip. Excellent sprayability. Excellent strength after 48 hours. Bonded materials remain elastic. Free from toluene and chlorinated solvents. Moisture-resistant.

bottom of page