top of page
Tradigo Giovanni logo
Description

INSTRUCTIONS FOR USE

Completely remove the old sole from the shoe and carefully clean the surface of the shoe. Surface preparation: the side to be bonded (underside) must be thoroughly roughened to open the pores of the rubber and remove any residues of mould release agent. Recommended adhesives: polychloroprene contact adhesive - Überkoll Trasparente or Super D - with the addition of 5% Überkoll Attivatore cross-linking agent for high bond strength. Polyurethane adhesive - Überkoll Poliuretano: requires heat activation. Pressing: apply high pressure for a short time using a press (minimum 0.4 MPa). Store in a dry place away from light, at a temperature between 15 and 25 °C. Avoid direct exposure to sunlight (UV radiation) and to sources of ozone, which can accelerate the ageing and embrittlement of rubber.

Light half soles for men and women in SBR/NR compound with a fine, non-slip textured pattern. Suitable for the production and repair of high-end classic and elegant shoes. Durable, non-slip, highly resistant to water, abrasion, fatigue, tearing and permanent deformation.
It has good elastic properties and is stable over time. It stays soft in every season. Highly resistant to cracking under dynamic stress and during the flexing caused by walking. White available to order. Excellent sanding and trimming. During mechanical sanding and edge trimming, the compound does not melt, clog tools or fray. The edge is clean and smooth, ready for subsequent dyeing and polishing. Thermal stability: the material keeps its dimensions and does not deform under the high temperatures generated during sanding. Thickness: 2 mm. 100% recyclable vulcanised rubber compound with a custom formulation. See the shapes catalogue for the full-size outline.

Blu Fox Half Soles Honey

Blu Fox Half Soles Honey

GT Blu Fox half soles, 2 mm.


DESCRIPTION

Light half soles for men and women in SBR/NR compound with a fine, non-slip textured pattern. Suitable for the production and repair of high-end classic and elegant shoes. Durable, non-slip, highly resistant to water, abrasion, fatigue, tearing and permanent deformation.

It has good elastic properties and is stable over time. It stays soft in every season. Highly resistant to cracking under dynamic stress and during the flexing caused by walking. White available to order. Excellent sanding and trimming. During mechanical sanding and edge trimming, the compound does not melt, clog tools or fray. The edge is clean and smooth, ready for subsequent dyeing and polishing. Thermal stability: the material keeps its dimensions and does not deform under the high temperatures generated during sanding. Thickness: 2 mm. 100% recyclable vulcanised rubber compound with a custom formulation. See the shapes catalogue for the full-size outline.

bottom of page